User's Manual Part 1

Configuring Network Settings
Chapter 5: Managing Your Network 109
Enabling/Disabling Hide NAT
Hide Network Address Translation (Hide NAT) enables you to share a single
public Internet IP address among several computers, by “hiding” the private IP
addresses of the internal computers behind the Safe@Office appliance’s single
Internet IP address.
Note: If Hide NAT is disabled, you must obtain a range of Internet IP addresses
from your ISP. Hide NAT is enabled by default.
Note: Static NAT and Hide NAT can be used together.
To enable/disable Hide NAT
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.
3. From the Hide NAT list, select Enabled or Disabled.
4. Click Apply.
A warning message appears.
5. Click OK.
• If you chose to disable Hide NAT, it is disabled.
• If you chose to enable Hide NAT, it is enabled.