User's Manual Part 1

Configuring Network Settings
Chapter 5: Managing Your Network 111
3. In the DMZ drop-down list, select DMZ.
4. Click Apply.
5. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
6. In the DMZ network's row, click Edit.
The Edit Network Settings page appears.
7. In the Mode drop-down list, select Enabled.
The fields are enabled.
8. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 109.
9. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 96.
10. In the IP Address field, type the IP address of the DMZ network's default
gateway.
Note: The DMZ network must not overlap other networks.
11. In the Subnet Mask text box, type the DMZ’s internal network range.
12. Click Apply.
A warning message appears.
13. Click OK.
A success message appears.