User's Manual Part 1

Configuring Network Settings
118 Check Point Safe@Office User Guide
Adding and Editing Tag-Based VLANs
To add or edit a tag-based VLAN
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. Do one of the following:
• To add a VLAN site, click Add VLAN.
• To edit a VLAN site, click Edit in the desired VLAN’s row.
The Edit Network Settings page for VLAN networks appears.
3. In the Network Name field, type a name for the VLAN.
4. In the Type drop-down list, select Tag Based VLAN.
The VLAN Tag field appears.
5. In the VLAN Tag field, type a tag for the VLAN.
This must be an integer between 1 and 4095.
6. In the IP Address field, type the IP address of the VLAN network's default
gateway.
Note: The VLAN network must not overlap other networks.
7. In the Subnet Mask field, type the VLAN's internal network range.
8. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 109.
9. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 96.