User's Manual Part 1

Before You Install the Safe@Office Appliance
22 Check Point Safe@Office User Guide
TCP/IP Settings
1. In the Local Area Connection Properties window double-click the Internet
Protocol (TCP/IP) component, or select it and click Properties.
The Internet Protocol (TCP/IP) Properties window opens.
2. Click the Obtain an IP address automatically radio button.
Note: Normally, it is not recommended to assign a static IP address to your PC but
rather to obtain an IP address automatically. If for some reason you need to assign
a static IP address, select Specify an IP address, type in an IP address in the range of
192.168.10.129-254, enter 255.255.255.0 in the Subnet Mask field, and click OK to
save the new settings.
(Note that 192.168.10 is the default value, and it may vary if you changed it in the
My Network page.)
3. Click the Obtain DNS server address automatically radio button.
4. Click OK to save the new settings.
Your computer is now ready to access your Safe@Office appliance.