User's Manual Part 1

Before You Install the Safe@Office Appliance
28 Check Point Safe@Office User Guide
4. Click the IP Address tab, and click the Obtain an IP address automatically radio
button.
Note: Normally, it is not recommended to assign a static IP
address to your PC but rather to obtain an IP address
automatically. If for some reason you need to assign a static IP
address, select Specify an IP address, type in an IP address in the
range of 192.168.10.129-254, enter 255.255.255.0 in the
Subnet Mask field, and click OK to save the new settings.
(Note that 192.168.10 is the default value, and it may vary if you
changed it in the My Network page.)
5. Click Yes when prompted for “Do you want to restart your computer?”.
Your computer restarts, and the new settings to take effect.
Your computer is now ready to access your Safe@Office appliance.
Mac OS
Use the following procedure for setting up the TCP/IP Protocol.