User's Manual Part 2

Manually Configuring a WLAN
170 Check Point Safe@Office User Guide
11. Click OK.
A success message appears.
12. Prepare the wireless stations.
See Preparing the Wireless Stations on page 184.
Table 24: WLAN Settings Fields
In this field… Do this…
IP Address Type the IP address of the WLAN network's default gateway.
Note: The WLAN network must not overlap other networks.
Subnet Mask Type the WLAN’s internal network range.
Wireless Settings
Network Name
(SSID)
Type the network name (SSID) that identifies your wireless network. This
name will be visible to wireless stations passing near your access point,
unless you enable the Hide the Network Name (SSID) option.
It can be up to 32 alphanumeric characters long and is case-sensitive.
Country Select the country where you are located.
Warning: Choosing an incorrect country may result in the violation of
government regulations.