User's Manual Part 2

Using the Traffic Monitor
194 Check Point Safe@Office User Guide
The Traffic Monitor page appears.
2. In the Traffic Monitor Report drop-down list, select the network interface for
which you want to view a report.
The list includes all currently enabled networks. For example, if the DMZ
network is enabled, it will appear in the list.
If Traffic Shaper is enabled, the list also includes the defined QoS classes.
Choose All QoS Classes to display a report including all QoS classes. For
information on enabling Traffic Shaper see Using Internet Setup on page 65.
The selected report appears in the Traffic Monitor page.
3. To refresh all traffic reports, click Refresh.
4. To clear all traffic reports, click Clear.
Note: The firewall blocks broadcast packets used during the normal operation of
your network. This may lead to a certain amount of traffic of the type "Traffic
blocked by firewall" that appears under normal circumstances and usually does not
indicate an attack.