User's Manual Part 2

Using Rules
Chapter 9: Setting Your Security Policy 219
In this field… Do this…
Destination Select the destination of the connections you want to allow or block.
To specify an IP address, select Specified IP and type the desired IP address
in the text box.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided. This option is not available in Allow
and Forward rules.
To specify the Safe@Office IP address, select This Gateway. This option is
not available in Allow and Forward rules.
To specify any destination except the Safe@Office Portal and network
printers, select ANY.
Quality of
Service class
Select the QoS class to which you want to assign the specified connections.
If Traffic Shaper is enabled, Traffic Shaper will handle these connections as
specified in the bandwidth policy for the selected QoS class. If Traffic Shaper
is not enabled, this setting is ignored. For information on Traffic Shaper and
QoS classes, see Using Traffic Shaper on page 153.
This drop-down list only appears when defining an Allow rule or an Allow and
Forward rule.
Log accepted
connections /
Log blocked
connections
Select this option to log the specified blocked or allowed connections.
By default, accepted connections are not logged, and blocked connections
are logged. You can modify this behavior by changing the check box's state.