User's Manual Part 3

Configuring the RADIUS Vendor-Specific Attribute
376 Check Point Safe@Office User Guide
In this field… Do this…
Web Filtering
Override
Select this option to allow all users authenticated by the RADIUS server
to override Web Filtering.
This option only appears if the Web Filtering service is defined.
HotSpot Access Select this option to allow the user to access the My HotSpot page.
This option only appears in Safe@Office 500 with Power Pack.
Configuring the RADIUS Vendor-Specific Attribute
For detailed instructions and examples, refer to the "Configuring the RADIUS
Vendor-Specific Attribute" white paper.
To assign permissions to specific RADIUS-authenticated users
1. Create a remote access policy as follows:
a) Assign the policy’s VSA (attribute 26) the SofaWare vendor code
(6983).
b) For each permission you want to grant, configure the relevant attribute
of the VSA with the desired value, as described in the table below.
For example, to assign the user VPN access permissions, set attribute number 2
to “true”.
2. Assign the policy to the desired user or user group.