User Manual

Setting Up Your Safe@Office Appliance as a VPN Server
308 Check Point Safe@Office User Guide
To set up your Safe@Office appliance as a VPN Server
1. Configure the VPN Server in one or more of the following ways:
• To accept remote access connections from the Internet.
See Configuring the Remote Access VPN Server on page 309.
• To accept connections from your internal networks.
See Configuring the Internal VPN Server on page 310.
2. If you configured the internal VPN Server, install SecuRemote on the desired
internal network computers.
See Installing SecuRemote on page 311.
3. Set up remote VPN access for users.
See Setting Up Remote VPN Access for Users on page 369.
Note: Disabling the VPN Server for a specific type of connection (from the Internet or
from internal networks) will cause all existing VPN tunnels of that type to
disconnect.