Migrating SR2 to SR2_NG by In association with May 24th 2011 1040, avenue Belvédère, suite 215 Québec (Québec) G1S 3G3 Canada Tél.
1 INTRODUCTION _____________________________________________ 4 2 FIRMWARE UPGRADE ________________________________________ 4 3 SOFTWARE MIGRATION ______________________________________ 4 4 IN CASE YOU CHANGE YOUR MIND… ___________________________ 5 Migrating SR2 to SR2_NG 3
1 Introduction With the growing presence of the Windows x64 architecture comes an increasing demand for support of the SR2 platform, tools and applications on that architecture. SR2 was developed before x64, and was never supported on that architecture. However our newer SR3 platform and libraries are supported on x64, in addition to x86. SR2_NG (Next Generation) is an upgrade to SR2 that allows it to be supported by the SR3 set of tools and libraries.
SR2 libraries, and they offer new and improved features. The SR2_NG platform is supported as part of the SR3 platform. 4 In Case You Change Your Mind… The SR2NG_to_SR2.exe application can be found in the All Programs\SR2_to_SR2NG folder. This application reverts the SR2_NG firmware to that of a standard SR2 board. Proceed as outlined in section 2, except in step 8: choose the SR2NG_toSR2.exe application.