Manual

16
7 Measurements tab
The Measurements tab can be divided in three parts. The partition information is in upper left
corner. Just under is the table of measurements. Finally, the details of the selected element are on
the right side.
Measurements controls
The partition menu let you select the partition to measure.
To add a new partition, select the last element (“new…”) of the menu
ring.
To delete a partition, select the partition and press the button
The area (m²) of the partition to be qualified.
The volume (m³) of the receiving room.
The partition description let the user enter some basic information on
the partition being qualified.
Details of the selected
element in the table
Partition Info
Table of Measurements