Owner's manual

16
would be higher than the maximum range. This is possible when the sum of the Level(%) of all the
signals that are mapped to an output is higher than 100%.
6.5 Default Setup
At the delivery, the default setup is:
Input Setup
Channel Selection:
Dynamic Range:
Input Type:
Description:
Unit name
Unit dBref
Sensitivity:
Record Path:
File Auto-Increment
Length of wave file
Channel 1
+/-1.5 V
ICP
In1, In2, In3, In4
Pa
2E-5
50 mV/Unit
\\OpusRoots\Data Logger\wave.wav
On
5 minutes
General Setup
Frequency Bandwidth:
24 kHz
Output Setup
Output generator:
Output Mix:
Sinus 1 kHz, 10% of full amplitude
Out#1 = Out#2 = OFF
The setup can be modified using the menu. The resulting configuration setup can be
saved and recalled using File → Save Config and File → Open Config.
7 Acquisition Interface
Click the button on the menu bar to access the Acquisition Interface.