Owner manual

4.1 Measure Controls

RUN/PAUSE/CONTINUE

When the user clicks this button, the measurement process is launched. The RUN

button then automatically becomes the PAUSE button.

When the user clicks this button, the measurement process is suspended. The PAUSE

button then automatically becomes the CONTINUE button

STOP/SAVE

When the user clicks this button, the measurement stops. The STOP button then

becomes the SAVE button.

When the user clicks this button, the active measurement is saved. The SAVE button is

then disabled until another measurement is complete.

4.2 Measure Info

Measure Info

This indicator displays the elapsed time and the buffer status bar.

This indicator displays the maximum measurement length. After the specified

duration, the measurement is automatically stopped. However, the user can stop the

measurement manually by clicking the STOP button. To change this value click on this

indicator to display a numeric keyboard.

This indicator displays the first frequency that is available on the spectrum. Clicking on

this indicator launches the block length interface.

This control allows switching the display mode between Instantaneous values and

time-averaged values during a measurement. When the measurement stops, the time-

averaged mode is automatically selected and the instant mode is unavailable.

This control allows writing a comment about the measurement. Any text written in this

filed will be included in the next measurement. To modify the comment of a previous

measurement, use the Measure Info Comment field. To modify the comment, click on

the text field to display a keyboard.