User Manual

38
The Time Weighting selects the parameter for each element. Some
parameters may be restricted depending on the display type (see
section 0 to 7.2.5).
The Frequency Weighting selects the weighting among the A, C or Z.
The user can choose to display the maximum or minimum value of the
period or the instantaneous values. There are cases where only the
instantaneous value is available (see section 0 to 7.2.5).
The Average Period selects the reference period of the element. By
default, the average period is set to Avg Time, which is the Leq Average
Time of the measurement. The average period can optionally be set to
DataSet, which is the time since the beginning of the DataSet (for details
on DataSets, see section 0).