User Manual

39
7.3.2 Vibration Data Selection
Figure 2 : Vibration Data Selection Interface
/
The Display Element Enable enables or disables an element in the
display. Each display zone can have up to four elements.
The Input Channel select input to display. In the SLM & 3Vib
application, only the inputs 2, 3 and 4 (X, Y and Z) are available for the
vibration part. (see section 6.2.1). Moreover, the quadratic sum of the
X, Y and Z axis can also be display
The Parameter selects whether the instant, average or DataSet value
will be display. The average value resets at the beginning of a Leq
Averaging Time period while the DataSet value resets on creation a
new DataSet.