Manual

34
8.1.2 Record on the Web
When Web + Local Drive is selected, the data are saved both locally (see above) and remotely. New
controls appear on the panel to configure the Web transfer.
This is an advanced mode intended for web monitoring. It is also possible to post-process the data
sent on the Web (FTP server) with the post-processing software (SLM Data Analyzer).
In this mode, the data are store locally for one full month before newer data replace older ones.
Notice that audio and photo files may be deleted prior the one month of age if disk space is missing.
This way, the more important data recording are preserved.
Use the Test button to validate the whole FTP transfer process used in Web mode. Click on the Web
path or the Edit button to call the Web Setup interface (figure below).
Specifies the server address used to transfer the data to.
This address can be a URL or an IP address (e.g.: 212.85.150.134)
Login user name
Login password
Port number of the FTP server. The default value is 21. To unlock
the control, press and hold the port number indicator for 5 sec.