Manual

5
4 Quick Start
The AutoStore Setup is presumed to set to OFF.
Step 1 Set the Averaging Time
Click on the field to change the Leq Averaging Time.
Step 2 Start the Measurement
Click on the button to start a measurement. The measurement will be performed according
to the current measurement setup.
The measurement can be paused by clicking the button and can be resumed by clicking the
button.
Step 3 Stop the Measurement
The measurement will stop at the end of the Leq Averaging Time. However, the measurement can
be stopped at any time with the button.
Step 4 Save the Measurement
Click on the button to save the measurement. The measurement will be saved in a DataSet
in the Record Directory (see section 8.1, p. 32) and its ID is specified in the Current ID Indicator (see
section 0, p. 9).
Once the measurement is saved in a dataset, the button is disabled.
The next table shows the left pane appearance before, during and after a measurement.