User guide Owner manual

Piccolo SLM User guide-Rev. 4.3 - 13 -
PICCOLO PC OPERATION
INSTALLATION
Requirements: The Piccolo Software must be installed on the PC that will be used with the unit. DO NOT
CONNECT THE PICCOLO USB CABLE before the Piccolo Software is installed on the PC (see the
Quick Guide instructions to install the Piccolo Software).
Step 1: Connect the Piccolo SLM to a PC via the supplied Piccolo USB cable.
Note: The Piccolo USB cable is a unique cable with embedded electronic components. Do not attempt to
use another cable with the Piccolo unit and do not use the Piccolo USB cable with other devices.
Inappropriate use can break the Piccolo unit and/or the Piccolo USB cable. In such a case, the
warranty will not apply.
Step 2: Start the Piccolo Software. The SETUP screen will appear on start-up.
Note: The remote keypad can be used to control the unit.
Figure 1: Setup menu (Main menu)
Piccolo USB Cable
Remote Keypad
Remote Display
Time & Date
Battery Life
Measurement Set-up
Preset-time Settings
Storage Set-up
Recording Settings
Memory Info
Alarm Set-up
Setup Tab