User Guide Manual

Tenor Data Logger Soft dB inc.
The interface uses the extended wave format that supports multi channels and continuous
sampling frequency adjustment. Windows with DirectX 8.0 module supports this format.
Figure 9: Input and Output Paths section
Note: If the Auto-Increment option is used, the Tenor software automatically adds a
number to the input wave file name at each new measurement. This way, the name must
be defined only for the first measurement. All others measurements will be logged in a
wave file with a three-digit extension number. For instance, if the name specified is
test.wav and if the Auto-Increment option is set to on:
First measurement file name: test.wav
Second measurement file name: test_001.wav
Third measurement file name: test_002.wav
…
User Manual p. 15