User guide Owner's manual

User manual for the ZEN 3-channel X-LMS controller Soft dB inc.
4.3 Control interface
Before launching the control, we suggest the configuration and identification results be
saved. The SaveCFG and OpenCFG functions on the main interface allow the user to
save and recall all configuration parameters and identification results. So, it’s always
possible to recall an old configuration and to launch the control. Also, the Use current
Wx? control allows using old control filters saved in the configuration file as a starting
point for the optimization process.
The control is activated with the Control ON function. Then, the main interface is put in
control mode and many new buttons are now accessible in the main tab (see Figure 16).
Figure 16: Main interface (Main interface tab and control ON)
The upper graph presents the selected Wx control filter in real time. The Freq/Time
control to its left allows toggling between the time and frequency domains for that filter.
The control filter can be saved when the control is in pause mode (use the CONTROL
PAUSE button) by using the See info function (this function is explained later in this
section).
ZEN User Manual p. 30