Operation Manual

 Connecting to Robot Operations Center (ROC)

Connect the machine to the network in advance when turning the main power switch Off. When turning the main power switch On

again, the machine will automatically connect to the network and Robot Operations Center (ROC).

Press the main power switch (I/O) to set it on (I)

After turning the power on, a screen indicating the machine is loading appears.

Check the ROC indicator at the top right of the touch display (⇒

⇒⇒

⇒see “Touch Display”)

 If the ROC indicator does not turn orange, move the machine to an area where the network can be connected.