Operation Manual
55
Locations for Placing Home Location Codes
Place Home Location Codes on walls, columns, etc. in a bright location and distanced approximately 60 cm from the floor and
approximately 80 cm from the machine.
Do not place Home Location Codes where they may be hidden, such as walls behind furniture or shelves.
Do not let Home Location Codes lean or turn; set the home location code horizontally and a little below the camera, placed in
front of the machine.
Do not place Home Location Codes in a sleeve or cover, and do not copy on them or laminate them. The machine may not be
able to read the Home Location Codes.
Avoid locations exposed to sunlight or strong light, and set them where brightness is even.
Leave Home Location Codes always set out. If unable to leave Home Location Codes always set out, you must place them
accurately in the same positions each time you clean. If the set locations of Home Location Codes are even slightly shifted,
cleaning will not be done correctly.
The back of Home Location Codes is sticky, allowing them to be placed directly on walls, etc. Replace with new Home Location
Codes if they have lost their stickiness. Depending on the wall material, the coating may peel where Home Location Codes are
placed. Consult with the building manager and place Home Location Codes in appropriate locations. Do not place on walls with
rough surfaces.