Operation Manual

Remove the notification pager from the machine (⇒

⇒⇒

⇒see “Notification Pager”)

Press the autonomous clean start/stop button (⇒

⇒⇒

⇒see “Autonomous Clean Start/Stop Button”)

Autonomous cleaning begins.

 Remove the notification pager (

⇒

see “Notification Pager”) from the machine and carry it with you.

During autonomous cleaning, the LED light indicating the direction the machine is moving in flashes orange 2 ti

 mes (example: when the machine is going to detour right, the right LED light will light).

During autonomous cleaning, the machine travels somewhat away from the edges of walls at a certain distanc

 e so as not to scratch walls, etc. Use manual cleaning to clean the edges of walls (⇒see “Manual Cleaning”). During

autonomous cleaning, do not stand in front of the LIDAR sensor.

Check that all functions are operating properly

 Once autonomous cleaning completes, the machine returns to the Home Location Code, and notification arrives on the

notification pager.

Check the notification that cleaning is completed with the notification pager

Tap “OK”

 Routes that have completed cleaning is shown in blue and routes that have not completed cleaning is shown in white.

 For maintenance and storage after use, see “Maintenance and Safety”.