Operation Manual
5
WARNING
Handling the Machine
DANGER
Do not allow liquid (tap water, refreshment beverage, seawater, pet urine, etc.) any electric conducti ve
foreign objects (pencil lead, anything metal, metal necklaces or hairpins, etc.) to touch the chargi ng
terminals or external connection terminals or to enter the equipment.
May result in short
-
circuiting and cause in fire, burns, malfunction, etc.
Immediately discontinue use if anything unusual is noticed during use, recharging, or storage such a s
noise, smoke, odor, etc.
May cause burns, fire, o
r electric shock.
Do not force the battery into the machine or battery charger if it cannot be connected correctly.
May cause overheating, rupture, or ignition of the machine or battery, or damage or burnout of the external
connection terminals, or leakage of the battery.
Use the equipment within an ambient temperature range of 0°C to 45°C, humidity of 10% to 80%. Als o, store
in a dry environment with no dust in an ambient temperature range of 0°C to 45°C.
The machine is specially for indoor use. Do not use outside such as on a street.
Do not use the machine in a stepped location, on an uneven floor (braille blocks), or on a sloped surf ace.
The machine may fall over or drop and damage the machine or floor if travelling where there are steps.
Travelling on an uneven floor may prevent the sensors from operating normally.
Do not expose the machine to dust in large amounts, sand, snow, ice, water, humidity, saltwater env
ironments, or brine mist (example: ocean environment, shore environment, etc.).
Be careful that dust does not adhere to the LIDAR sensor, camera, or other sensors.
May interfere with normal machine operation or lead to an accident.
When using autonomous cleaning mode, make sure that the operator is able to respond immediately to an
alert received from a special app or the notification pager.
Not observing this may lead to an accident involving the user, third persons, surrounding objects, etc.
When using the machine in an autonomous mode, follow the regular floor cleaning practice and use
appropriate signboards (cleaning in process signboard).
Use the machine with its wheels always in contact with the floor. When using the machine in manual cleaning
mode, avoid abrupt operation except where unavoidable.
In areas where the machine is inoperable or unmovable due to power not turning on, move the mach ine to a
safer location.