User Manual

TIGHTENING HITCH PIN WITH LOCK

Note The locking and tightening hitch pin is designed for use with 2” hollow ball mounts or hitch mounted

accessories only.

Note If this product is left on the receiver for long periods of time, the bolt may loosen slightly. Periodically check the

tightness of the bolt and tighten if necessary.

Note A quality lock lubricant (preferably with graphite) is recommended for use at least once a year to best maintain

the functionality of the lock. Simply add the lubricant to where the key enters the lock.

7/8” (21mm) Wrench

TOOLS REQUIREDPARTS INCLUDED

(A) Stainless Steel Lock Bolt

(B) Lock Washer

(D) Nut Holder

(E) Nut Holder Adapter

(F) Brass Lock with Dust Cover

Model #25219

(A)

(B)

(C)

(D)

(E)

(F)

1. Place square nut (item C) in the nut holder (item D).

2. Fit the nut holder into the nut adapter (item E). The adapter

can be rotated 180° for variances in wall thickness of the

ball mount or receiver mounted equipment.

3. Fit the nut holder assembly into the ball mount until the

threaded nut lines up with the side hole in the ball mount.

4. Slide the ball mount into the receiver until the holes line up.

5. Place the lock washer on the bolt and slide the bolt through

the holes. Hand tighten.

6. Place the lock over the opposite end of the bolt (making sure

it is engaged) and place the dust cap over the key hole.

7. Use a 7/8” (21mm) wrench to tighten the bolt head to no

more than 60ft. lbs.

8. Periodically check the tightness of the bolt to ensure it

is secure.

Assembly Instructions

PAGE 1
TIGHTENING HITCH PIN WITH LOCK Model #25219 Note The locking and tightening hitch pin is designed for use with 2” hollow ball mounts or hitch mounted accessories only. Note If this product is left on the receiver for long periods of time, the bolt may loosen slightly. Periodically check the tightness of the bolt and tighten if necessary. Note A quality lock lubricant (preferably with graphite) is recommended for use at least once a year to best maintain the functionality of the lock.
PAGE 2
LIMITED LIFETIME WARRANTY Access Racks & QuietRide Towing Accessories Softride, Inc., warrants the original owner of new Softride Access RacksTM and QuietRideTM Towing Accessory products against defects in workmanship and materials for the lifetime of the product provided it is purchased from an authorized Softride dealer. This Limited Lifetime Warranty is non-transferable and shall only apply to normal and ordinary use of this product.