Installation Guide

STEP 2: Mount Polystyrene Strips

Mount polystyrene strips directly to masonry walls or

drywall using construction adhesive at the bottom of

the drop ceiling, base of walls, every two feet on cen-

ter and along the chair rail.

For installation on wood or metal studs, skip to Step

STEP 3: Mount Vinyl Rails

Install vinyl rail extrusions over the polystyrene strips

using construction adhesive. Use 5/8” ﬂat head

screws to secure rails until adhesive cures.

For installation on wood or metal studs, screw vinyl rail

extrusions directly to studs.

STEP 4: Insert Bottom Wall Panels

Postion bottom wall panel between the chair rail and

the bottom rail.

Must purchase Split Panel Top-Only 2-Pack Kit

separately to ﬁnish the top section the wall.

STEP 5: Insert Top Wall Panels (sold separately) STEP 6: Tuck Fabric and Add Trim (optional)

Once all panels are in place and adhesives have cured,

tuck in the fabric edges along the vinyl rails using the

installation roller.

Add base board, chair rail and/or crown moulding (not

included) to complete your space.

Sample Finished Space With Split Panels

Installation Instructions

Split Panel Bottom-Only 2-Pack Kit