Installation Guide

Kit Types Available: (Each kit sold separately)

Full Panel 2-Pack Kit

Includes 2 full 49”W x 97”H ﬁberglass acoustic wall

panels covered in choice of fabric, railing system com-

ponents, installation roller and instruction manual.

Split Panel Bottom-Only 2-Pack Kit

Includes 2 split 49”W x 32”H ﬁberglass acoustic wall

panels covered in choice of fabric, railing system com-

ponents, installation roller and instruction manual. This

kit must be combined with the Split Panel Top-Only

2-Pack Kit to make a full 98”W x 97”H wall section.

Split Panel Top-Only 2-Pack Kit

Includes 2 split 49”W x 65”H ﬁberglass acoustic wall

panels covered in choice of fabric. This kit must be

combined with the Split Panel Bottom-Only 2-Pack

Kit to make a full 98”W x 97”H wall section.

Outside Corner Rail Installation Extrusion

Includes one 96”L outside corner vinyl rail installa-

tion extrusion. This extrusion must be ordered to

connect wall panels that intersect on a 90 degree

outside corner.

Additional Items Needed For Installation:

• Installation Roller (included with each total order)

• Construction Adhesive

• Spray Adhesive

• Utility Knife

• 5/8” Flat Head Screws

• Tape Measure

• Laser Level

• Circular Saw or Miter Box Saw

STEP 1: Calculate Number of Kits Needed

Measure the length (in feet) of each wall being covered.

Add all wall lengths together and divide by 8. The total

equals the number of kits needed. Always round up to

the next whole number.

Example: 24’ wall ÷ 8 = 3.

A total of 3 Bottom-Only kits AND 3 Top-Only kits are

needed to ﬁnish this wall.

Full Panels Split Panels

Top

Bottom

Installation Instructions

Split Panel Bottom-Only 2-Pack Kit

PAGE 1
Installation Instructions Split Panel Bottom-Only 2-Pack Kit Kit Types Available: (Each kit sold separately) Full Panels Full Panel 2-Pack Kit Includes 2 full 49”W x 97”H fiberglass acoustic wall panels covered in choice of fabric, railing system components, installation roller and instruction manual. Split Panel Bottom-Only 2-Pack Kit Includes 2 split 49”W x 32”H fiberglass acoustic wall panels covered in choice of fabric, railing system components, installation roller and instruction manual.
PAGE 2
Installation Instructions Split Panel Bottom-Only 2-Pack Kit STEP 2: Mount Polystyrene Strips STEP 3: Mount Vinyl Rails STEP 4: Insert Bottom Wall Panels Mount polystyrene strips directly to masonry walls or drywall using construction adhesive at the bottom of the drop ceiling, base of walls, every two feet on center and along the chair rail. Install vinyl rail extrusions over the polystyrene strips using construction adhesive. Use 5/8” flat head screws to secure rails until adhesive cures.