KBS-66K002 Please scan the below QR code to get the video for easy installation. Email:sofucor_service@163.com Email:sofucorceilingfan@163.com Website: www.sofucorfan.
01 Safety Information 1 Remote control manual 13 Warranty 2 3 Match code Fans Balance 14 15 4 5 Care and cleaning Three ceiling installation methods Accessory drawing Installation procedure Trouble shooting Connecting Smart Systems 16 16 17 02 WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades. Warning: Kindly turn off the power when connecting cables.
03 2
04 5 9 5 2 9 2 3 9 3 3
05 4
06 Install the blades 1. Connect the blades and spokes 2. Pay attention to the front and back 3. Take out the screws 4.
06 Install the light plate 5.Loosen two screws, take out one 6. Install lamp plate, Retighten the three screws 7. Loosen the original screws on the light plate 8.
06 Install the downrod 9. Retighten the three screws 10. Disassemble the downrod(No.15) 11. Thread the motor wires into the rod 12.
06 Install the coverage 13. Tighten the screws 14. Put the decorative cover(No.1) through the downrod 15. Put the canopy cover(No.10) through the downrod 16. Put the canopy(No.
06 Install the rod ball 17. Put the rod ball through the downrod 18. Put the lock washer to the hole of the downrod and push the rod ball to the top of the downrod 19.
06 Black White 10
06 Wiring and installation 20. Connect the wire from the ceiling fan to the receiver(No.1-Red, White and Black wires)( No.2-Red, White and Yellow wires) 21. Install the mounting bracket, tighten 22. Install to ceiling mounting bracket 23.
06 Fixed coverage 24. Cover the canopy. 25. Tighten the screw 26. Push the canopy cover to the canopy 27.
06 07 ① ⑤ ② ⑥ ① Fan ON/ OFF ② Fan Speed + ③ Fan Speed - ④ Foward/ Reverse ③ ⑦ ⑤ Light ON/ OFF ④ 8 ⑥ Warm light ⑦ Neutral light 8 White light After the reversible button is pressed, the fan slowly slows down to a stop. And then it started to reverse.
08 2. The Learn Key must be pressed within 5 seconds, after turning on the main switch. Keep pressing the button LEARN key in excess of 3 seconds it becomes a LEARN status. 3s 3. The indicator light of the remote flashes two times and the code is successful.
09 15
10 11 11 Website: www.sofucorfan.
17
18
19
20
