Questions or Support ? Email:sofucor_service@163.
01 Safety Information Warranty Pre-Installation Hardware included Celing Hanging the Fan Attaching the Fan Blades Use of remote control Wiring diagram Operation Fans Balance Care and cleaning 2 3 3 4 5 6 02 h s 2 8 9 9 10 11 12
03 04 3
05 D E 4
08 Installation of the hanging bracket(suspension part) 5
08 1. 2. 6 3. 4.
08 5. 6.
09 7. 8 8. 7 9. 10.
10 11 Remote control wiring diagram 9
12 The switch controls the direction of the blades: forward or reverse.
13 Put the clip in the center of a blade. turn on the fan and if the shake persists, put the clip in another blade until the shake is reduced. Then this blade will need the counterweight. Paste the counterweight on the surface of the blade which near the clip, remove the clip and test the fan. If it keep staggering, put another counterweight. if it gets worse, try another better area to place it. please try it patiently till the fan is balance.
14 15 The fan is noisy. Please follow NO.13 fan balance(page11) If the above soluction can not help you to solve the problem. Please contact us: sofucor_service@163.
Questions or Support ? Email:sofucor_service@163.
