Product Manual Automatic cat litter box Model:HIP-C101W The picture is for reference only, please refer to the actual product!. Please read the instruction manual carefully before using product.
Table of Content 1 Precautions 2 Packing List 3 Instructions 4 Usage of APP 5 Cleaning and Maintenance 6 Common Failures and Troubleshooting Methods 1. Precautions ●This product should be placed and used indoors or similar environment. ● It should be placed on flat ground or wooden ground. ●When transporting the product without package, please do not drag it without leaving the ground and handle it carefully, otherwise the weight sensor will be damaged. ●The cat’s weight should be 2.2LB - 22LB.
2. 3. Packing List ●Host ×1 ●Special garbage bag (gift) ×1 ●Power supply adapter ×1 ●Manual ×1 main technical index product name: fully automatic cat toilet model:HIP-C101W power adapter:input AC100-240V/0.4A output DC12V/1A rated power:≤6W(without UV lamp sterilization power) UV lamp sterilization power:≤5W standby power:≤0.5W weighing range:1-20kg(MAX) weighing precision:±0.01kg (static) cat litter load:≤3L collecting bucket capacity:≤3L running noise:≤55dB(A weighting) UV wavelength: 253.
product size:length655mm x width642mm x height605mm net weight:8.5±0.3kg normal working environment:environment temperature5~40°C,Relative humidity≤93%,no condensation storage and transportation environment:environment temperature-20~60 ° C,Relative humidity ≤ 93%,no condensation 4.
※Preparation before turning on Before connecting the power supply adapter, make the following preparations (otherwise the weight sensor of the device cannot initialize the data). 1. First load the cat litter onto the silicone tray (refer the MAX line). 2. Take out the collection bucket, put the garbage bag on it, and put the bucket back in its place. ※Turn on the device Connect the adaptor to the device (IN DC 12V), the device automatically enters the standby state.
interface and function operation. Working status: the green indicator light is flashing, indicating that the cleaning cabin is about to rotate; the green indicator light is on steady when the cleaning cabin is rotating. Weight display: when the cat is in use, it is displayed as the cat’s weight. No bucket reminder: it will be displayed after the collection bucket is taken out. The voice will be broadcast, and the device will stop working.
and setup . The device is placed within the effective distance of WIFI, and the device is on standby. Switch on cell phone’s WIFI, location, Bluetooth, then open the APP, click "Add Device" on the homepage, then click "Auto Scan". Immediately press the button under the display of device for 5 seconds, until hearing the "ticking" sound, and the WIFI icon flashes. Click "Access location" in the "Auto Scan" of the APP, and then click "Start Search".
Function Description Cat Weight Real-time feedback of the cat's weight Toilet times Number of times cat go to toilet every day One-click cleaning Press once, the device will run one time for cleaning Smart deodorizing null (optional attachment) Voice switch On or off the voice of device Trash can switch Switch to large or small trash can Timed sleep Click to enter, you can add timing time.
6. Cleaning and Maintenance ● Clean the top cover and surface Please unplug the power supply adapter, use a clean, soft, damp cloth with some detergent to wipe. ※ Note: There is a circuit board inside the product, and liquids are not allowed to enter. ● Clean the cleaning cabin and collection bucket The cleaning cabin and the collection bucket are detachable structures, which can be disassembled and washed separately, but they must be dried before put back.
7. Common Failures and Troubleshooting Methods Item Failure Cause Analysis Troubleshooting 1. Check if the placement is balanced and stable, The check if it is placed on a hard floor or wooden floor. weight 2.Check if the cat litter pad is in contact with the 1 Reposition device. value has device. changed 3.Check if there are other objects in contact with the device. 2 Not work 1. Sensor initialization error. Restart the device. 2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
