Item Brochure
7
Rear Locking Builder Series - 5
1
/
2
x 7
System contains a copper coated 25 mm prism, a tilting holder that has either
a side-mounted or center vial. The prism can be either mounted in a 0 or -30
mm oset position. Kit comes with two adapters, plumb bob holder and padded
carrying case with a belt loop.
724861 Mini Prism System with Non-Adjustable Center Vial
724862 Mini Prism System with Non-Adjustable Side Vial
Builder Series Mini Prisms
System includes a 25 mm silver coated prism, three 60 cm length pole sections
– in red and white 10 cm stripes (total length is 1.8 m/5.9 ft.). The prism can be
mounted in a 0 mm oset position. The kit also comes with a padded carrying
case and a plumb bob hook, and cap for prism to use as an oset prism by itself.
724870 Mini Prism System Kit with Pin Pole
Pin Pole with Sliding 25 mm Prism System
25 mm specialty prism that can be mounted to a range of dierent surfaces and
used in many dierent environments.
724814 90º L-Bar Monitoring Prism
Monitoring Prism
Rear Locking Builder Series 6 x 9
These prisms are compatible with the Builder Series Standard
Prism Systems. 62 mm Prism Plastic Canisters are available in two
styles and colors:
724801 Prism 62 mm Silver Coated Water Sealed
724802 Economy Prism 62 mm Silver Coated
724813 Economy Prism 62 mm Copper Coated
Single Prisms
62 mm Strobe Prism Assembly with a 5
1
/
2
x 7 in. or 6 x 9 in. orescent orange
target. The prism can be either mounted in a 0 or -30 mm oset position. It works
perfectly in low light conditions and all the electronics are housed in the prism
canister. The battery is a Sanyo CR-1/3N; good for over 20 hours of use. Comes
with a protective carry case for the target or complete system.
724100
Strobe Prism Assembly with 5
1
/
2
x 7 in. Target
724101 Strobe Prism Assembly with 6 x 9 in. Target
Strobe Prism Assembly
724100
724862724861
Specialty Prisms