ASSEMBLY INSTRUCTIONS
SAFETY INFORMATION 1. . 3. 1. assemble or install the product. 2.Assemble the item on a soft, non-abrasive surface such as carpeting to avoid damage. 3. Estimated Assembly Time: 120 minutes Recommended maximum sitting weight for the sofa set 350 160 Before beginning assembly of product, make sure all parts are present. Compare parts with parts list.
PACKAGE CONTENTS X2 PART DESCRIPTION QUANTITY 2 E F 2 1 1 HH Plastic x asher Qty. 6 Qty. 84 Qty. 28 Extra 2 Extra 6 Qty. 8 Qty. Extra 1 Extra 1 Plastic Plastic shackle Qty. 20 Extra 1 Ruler - Use this ruler to help correctly identify the screws. 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 Qty.
ASSEMBLY INSTRUCTIONS FRAME ASSEMBLY 1. Align two holes of the back frame (A). Insert an M6 x 35 L bolt (AA) through M6 washer (CC), with the seat frame (B). Do not tighten completely. Repeat 1 Hardware Used M6 x 35 L Bolt x2 M6 Washer x2 2. Align all four holes of the side frame (C). For each hole, insert M6 x 35 L bolt (AA) through M6 washer (CC), the seat frame (B) and back frame (A). Repeat this step for the oposite side. Do not tighten completely.
ASSEMBLY INSTRUCTIONS FRAME ASSEMBLY 4. Align two upper holes of the back frame ( D). Insert an M6 x 35 L bolt (AA) through M6 washer (CC) with the seat frame (E ). Then align the side holes of the back frame ( D) insert an M6 x 5 L ( ) through M6 washer (CC). Do not tighten completely. Repeat this procedure 4 Hardware Used M6 x 35 L Bolt x M6 Washer x 5. Align two holes of back frame ( D) the oposite side with the side frame ( F) insert an the M6 x 35 L bolt (AA) through the M6 washer (CC).
FRAME ASSEMBLY 7. Attached the products by plastic shackles. 7 Hardware Used HH Plastic shackle X 10 Attach four the " L " plastic foot (FF) to the lower corner of the table (G) by using M6 x 25L bolt (ZZ) and Knob (DD). Then tighten all bolts by using allen wrench. 8. 8 Hardware Used ZZ M6 x 35 L Bolt 9. ZZ x4 Knob x4 " L " Plastic Foot x4 Put the glass (H) on the table (G). And make adjustments. The assembly of this product has been completed.
ITEM NO. 860020BU/GY CTN NO.