CAUTION : You must read this before you proceed Single Chair CAUTION : This Chair is NOT a TOY. Keep your child / children at bay during the assembly process.
Label Picture Description QTY ① Bolt Cap 9 ② Bolt M6*35mm 7 ③ M6 Washer Rings 9 ④ Allen Key 1 ⑤ Bolt M6*50mm 3 Before Beginning Assembly: 2 OF 7
Over View Back Cushion (E)) Right Armrest(B) Left Armrest(A) Seat Cushion (D)) Seat (C)) FRONT FACING This Armless Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Armless Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Turn the chair over, and attach Bolt(⑤) and Washer(③) using Allen Key(④) as pictured above. Only loosely tighten Bolts. Step 3 Put the Seat(C) against the Left Armrest(A) and line up the three mounting positions of both. Attach the Seat(C) to the Left Armrest(A) using Bolts(②) and Washers(③) with Allen Key(④). Only loosely tighten Bolts.
Step 4 Turn the Chair over, and attach Bolt(⑤) and Washer(③) using Allen Key(④) as pictured above. Only loosely tighten Bolts. Step 5 Turn the Chair right side up. Place the Chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Chair. This would help to align all the parts at all the joint areas. Then get off the Chair, and in a sequential manner, proceed to tighten all bolts. When tightening the Bolts, tighten sequentially.
Step 6 Put the Bolt Caps(①) over all the Bolts. Step 7 Turn the Chair right side up. Place the Back Cushion(E) and Seat Cushion(D) onto the Chair. Your Chair is ready for use. Caution:This Chair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
CAUTION : You must read this before you proceed Love Seat CAUTION : This Love Seat is NOT a TOY. Keep your child / children at bay during the assembly process.
Label Picture Description QTY ① Bolt Cap 9 ② Bolt M6*35mm 7 ③ M6 Washer Rings 9 ④ Allen Key 1 ⑤ Bolt M6*50mm 3 Before Beginning Assembly: 2 OF 7
Over View Back Cushion (E)) Right Armrest(B) Left Armrest(A) Seat Cushion (D)) Love Seat (F)) FRONT FACING This Armless Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Armless Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Turn the Love Seat over, and attach Bolt(⑤) and Washer(③) using Allen Key(④) as pictured above. Only loosely tighten Bolts. Step 3 Put the Love Seat(F) against the Left Armrest(A) and line up the three mounting positions of both. Attach the Love Seat(F) to the Left Armrest(A) using Bolts(②) and Washers(③) with Allen Key(④). Only loosely tighten Bolts.
Step 4 Turn the Love Seat over, and attach Bolt(⑤) and Washer(③) using Allen Key(④) as pictured above. Only loosely tighten Bolts. Step 5 Turn the Love Seat right side up. Place the Love Seat on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Love Seat. This would help to align all the parts at all the joint areas. Then get off the Love Seat, and in a sequential manner, proceed to tighten all bolts.
Step 6 Put the Bolt Covers(G) over all the Bolts. Step 7 Turn the Love Seat right side up. Place the Back Cushion(E) and Seat Cushion(D) onto the Love Seat. Your Love Seat is ready for use. Caution:This Chair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Table Label Description QTY W Tabletop 1 V Leg 4 Description QTY ① Bolt Cap 9 ⑦ Bolt (M6*20mm) 9 ③ Washer 9 ④ Allen Key 1 Label Picture Picture 1 OF 5
Before Beginning Assembly: Overview This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Open the carton ang place all the parts onto a clean,non-marring surface. Attach Leg(V)onto the Tabletop(W)with Bolt(⑦)and Washer(③) using Allen Key(④). Only loosely tighten Bolts. Caution: The Tabletop is heavy.always bu use two or more adults whenever lifting or moving it. Step 2 Repeat Step 1 with the remaining three Legs(V). Only loosely tighten Bolts.
Step 3 Stand the Table right way up. Place the Table on a LEVEL SURFACE to check for wobbles. If it wobbles, lift the table some 20cm to 30cm high from the ground. Keep your feet and toes well away from the drop zone. Drop the table freely and vertically with all four legs, hitting the ground, at the same time. This Drop Test will help to ensure that all Bolts and gaps reach full alignment status. Test again for evenness on a LEVEL SURFACE.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.