CONTENTS Product Introduction P.1 Tool You May Need P.1 Mechanical Parts List P.1 Plastic Parts P.2 Sticker A Sticker B & Zipper bag P.2 P.3 Tip P.3 Module Assembly Body Module Assembly P.4 Head Module Assembly P.6 Testing P.8 Wheel Module Assembly P.9 Sticker A P.9 Boat Module Assembly P.10 Tips P.12 14 Robot Modes P.
Product Introduction Alternative energy is the future, so now is the perfect time to start children on the path of learning basic concepts behind these technologies. Fortunately, this product is powered by the sun, there are no batteries required. The robot moves in direct sunlight and allows children to create while using their infinite imagination. There are two levels in building the robot kit. Level one includes: Turtle-bot, Beetle-bot, Quadru-bot, Boat-bot,Walker-bot, Dog-bot, and Wheel-bot.
Plastic Parts C D A B F1 E Sticker QTY A Make sure to cut the plastic parts 1 2 E correctly .
Sticker B Zipper bag QTY QTY 1 9 Tip For easy identification of each plastic part, suggest to sort out plastic parts and put them into zipper bags as per instruction. ( P.S. Each zipper bag to be placed an illustrated sticker B (as below) first.
Body Module Assembly Finished Product B 1 P1 P3(Yellow) B 2 A10 1 P5(Red) 2 P8 P5(Red) C4 P6(Green) 1 2 3 P4 4
B 3 P6(Green) C4 P5(Red) P1 P4 C5 B6 A11 D2 D1 BACK 5 C5
Head Module Assembly Finished Product H 1 A4 02 01 H 2 P7 x2 C8 07 P2 06 C8 06 C3 07 6
H 3 2 1 H 4 B11 A3 B10 09 A3 A3 H 5 A5 A6 C9 7 x2
Testing : You need to test the gear box first. Prepare the below parts first before you test the “Gear box” and “Solar panel”. Body (Gear Box) 01 Assembly Head (Solar Panel) C6 X2 03 Testing SUN Head Body OR C6 C6 50W & UP HALOGEN FRONT 02 Wiring BLACK RED Negative Make sure C6 is turning ! 04 Trouble shooting Positive If C6 does not work, Please disassemble the gear box, and back to the page 4.
Wheel Module Assembly A12 F1 X4 Sticker A B1(or B2) 04 X2 05 X2 08 C1 X8 X3 B2(or B1) 03 04 X2 05 X2 B8 X4 X3 Cut off the two burrs before assembly.
Boat Module Assembly form the boat P9 Valley fold Mountain fold 10
A9 X4 E13 X4 11
Tips (When your part’s stuck.
Robot Modes LEVEL 1 LEVEL 2 08 P.46 Auto-bot 01 P.14 Turtle-bot 02 P.19 Walker-bot 09 P.50 Crab-bot P.55 10 Slither-bot P.22 03 Quadru-bot 11 P.60 Roly poly-bot 04 P.27 Wheel-bot 05 P.32 Boat-bot 12 P.66 Boxer-bot 13 06 P.37 Beetle-bot P.71 Surf-bot 14 P.76 Row-bot 07 P.
01 Turtle-bot Assembly Level 1 Prepare the below parts first before you assemble the “Turtle-bot”.
04 Ensure all shafts between panels 03 & 03 are properly installed and set in the right position. 03 E8 1 01 03 1 2 1 2 E8 02 E8 3 02 01 FRONT 01 01 E8 Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly.
01 3 E8 E8 FRONT C1 C1 E14 C1 01 4 C1 E14 C7 X2 C7 X2 FRONT 16
01 5 FRONT A8 E5 A2 Turn 90 A2 FRONT E5 A8 17
01 6 HEAD BODY RED BLACK Black Red Black Red Neck Angle 2 2 1 Head 18
Level 1 02 Walker - bot Assembly Prepare the below parts first before you assemble the “Walker-bot”. Body A2 X1 C7 X2 A8 X1 E6 X6 A7 X1 E14 X2 E5 X4 01 Head B4 X2 E4 X2 B5 X2 E7 X2 E8 X2 B8 X1 A1 X1 B9 X2 E3 X1 1:1 B8 E7 E7 E3 02 Ensure all shafts between panels B4 & B4 are properly installed and set in the right position.
03 02 1 Body E6 FRONT E6 E8 02 2 01 FRONT E8 Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly.
02 E4 4 A8 E5 A1 E14 B5 E6 FRONT B9 E5 E4 A7 Turn 90 A2 E5 E14 B5 E6 B9 E5 FRONT 21
02 Red 5 2 HEAD Black 2 BODY RED BLACK Head Neck Angle 1 Black Red 03 Quadru-bot Assembly Level 1 Prepare the below parts first before you assemble the “Quadru-bot”.
01 02 C2 E1 E2 E2 C2 B8 E1 E1 E1 1:1 03 1:1 E3 04 B8 E7 E7 05 B8 E1 E1 X2 1:1 E8 1:1 06 B4 E6 E6 B3 23 B4 B3
07 05 Ensure all shafts between panels 05 & 06 are properly installed and set in the right position. 01 1 04 1 2 06 03 2 02 2 02 01 03 04 03 3 FRONT 03 Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly.
03 3 C7 FRONT C7 03 4 RIGHT A2 FRONT E5 A8 E5 25
03 5 A8 E5 FRONT E5 A2 LEFT 03 6 HEAD BODY RED BLACK Red 2 Black 2 Head 1 Neck Angle 26 Black Red
04 Wheel-bot Assembly Level 1 Prepare the below parts first before you assemble the “Wheel-bot”.
02 Wheel B1X3 01 (or B2X3) E14X3 E14X3 E8X3 C6 28
03 01 B2 X3 Wheel (or B1X3) E14 X3 E14 X3 C6 29 E8X3
04 1 Body FRONT E6 E6 BACK E6 BACK E14 A1 B4 E14 E10 Wheel E10 30 A7
04 2 02 03 04 Black 3 Head 2 2 Red Neck Angle 1 HEAD BODY RED BLACK Black Red 31
05 Boat-bot Assembly Level 1 Prepare the below parts first before you assemble the “Boat-bot”.
02 Wheel 01 B1X3 (or B2X3) E14X3 E14X3 E8X3 E4X4 33 C6
03 B2 X3 Wheel 01 (or B1X3) E14 X3 E14 X3 C6 E8X3 E4X4 34
05 Body 1 Body FRONT BACK Turn 180 E6 E6 FRONT FRONT B4 E9 X2 Boat 35
05 2 02 FRONT 05 03 3 Black Head 2 2 Neck Angle Red 1 HEAD BODY RED BLACK Black Red 36
06 Beetle-bot Assembly Level Level 11 Prepare the below parts first before you assemble the “Beetle-bot”.
03 04 E3 C2 E3 C2 B8 E7 E7 E7 E7 X2 1:1 05 1:1 01 03 04 03 02 01 02 Ensure all shafts between panels 01 & 01 are properly installed and set in the right position.
03 02 04 02 03 FRONT Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly.
06 3 B2(or B1) B1(or B2) B2(or B1) FRONT B1 (or B2) 06 4 B2(or B1) B1(or B2) FRONT RIGHT LEFT 40
06 5 HEAD BODY RED BLACK Red Black Red Black Neck Angle 2 Head 2 1 41
07 Dog-bot Assembly Level 1 Prepare the below parts first before you assemble the “Dog-bot”.
03 E3 04 C2 E6 B4 B3 E7 B7 E7 1:1 05 E1 E8 E6 E14 06 B3 B5 B4 C2 E6 E1 1:1 07 06 05 2 03 3 2 04 3 1 01 E8 4 Ensure all shafts between panels 06 & 04 are properly installed and set in the right position.
Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly.
07 2 movement 1 : shaking & wagging tail! B2 (or B1) E11 movement 2 : jumping & wagging tail! E11 B1 (or B2) 07 Black 3 Head Red 2 2 HEAD BODY RED BLACK Black 1 Red Neck Angle 45
Level 2 08 Auto-bot Assembly Prepare the below parts first before you assemble the “Auto-bot”.
03 E1 04 E8 E1 E8 B8 C2 E1 E1 1:1 05 X2 1:1 06 B4 B3 B4 E6 B3 E6 X2 B3 07 05 E3 01 2 2 2 1 06 02 01 04 03 04 Ensure all shafts between panels 05 & 06 are properly installed and set in the right position.
02 FRONT 08 01 04 03 04 01 E3 Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly.
08 2 E14 C1 E14 E8 C1 08 3 Black 2 Head 2 Red Neck Angle HEAD 1 BODY RED BLACK Black Red 49
Level 2 09 Crab-bot Assembly Prepare the below parts first before you assemble the “Crab-bot”. Body A8 X2 B1 X2 B2 X2 C7 X4 E14 X4 E5 X8 01 B4 X2 E4 X10 E7 X4 B8 E1 C2 A2 X2 Head B5 X2 B8 X3 E1 X2 E8 X1 B9 X2 C2 X1 E3 X2 02 E7 E8 E3 B8 E7 E1 1:1 03 1:1 B4 01 X2 02 X2 B4 2 1 3 2 Ensure all shafts between panels B4 & B4 are properly installed and set in the right position.
04 02 01 02 Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly.
09 2 FRONT A2 A8 E5 X2 BACK A2 A8 Turn 180 E5 X2 RIGHT LEFT BACK 52
09 3 B1(or B2) E14 X2 B2(or B1) 09 E14 X2 4 B1(or B2) E5 B2(or B1) E4 E5 E4 09 5 B5 B5 53 E5
09 6 E4 E4 E4 B9 E4 B9 09 7 Red Black Head 2 2 Neck Angle HEAD 1 BODY RED BLACK Black Red 54
Level 2 10 Slither-bot Assembly Prepare the below parts first before you assemble the “Slither-bot”.
03 E1 E8 04 C6 E7 E1 E3 E7 B7 1:1 05 1:1 E8 06 E9 B3 B4 B5 E1 E6 E1 X2 1:1 07 C1 C1 C1 E5 C1 E5 E5 56
02 01 03
10 1 E10 09 Body E10 E6 C7 E6 C7 10 2 08 05 04 07 58
10 3 Wheel E12 Wheel E12 10 4 A7 E5 Turn 90 E5 A1 59
10 5 Red Black 2 2 Neck Angle Head HEAD BODY 1 RED BLACK Black Red Level 2 11 Roly poly-bot Assembly Prepare the below parts first before you assemble the “Roly poly-bot”.
01 C1 C1 X2 C1 C1 11 1 (or B2) B1 Body E14 X2 BACK B2 (or B1) E4 E4 X2 B8 E4 C6 B8 61
11 2 01 Wheel E14 X3 62
11 3 A8 A2 11 4 (or B2) B1 E14 X2 B2 (or B1) E4 X2 E4 B8 E4 B8 C6 63
11 5 01 Wheel E14 X3 64
11 6 A8 A2 11 7 Head Red Black 2 2 HEAD BODY RED BLACK Black Neck Angle Red 1 65
Level 2 12 Boxer-bot Assembly Prepare the below parts first before you assemble the “Boxer-bot”.
03 E1 E7 04 E8 E3 B8 E7 C2 E1 1:1 05 X2 1:1 06 B4 05 E6 X2 01 03 B3 X2 02 E8 Ensure all shafts between panels 05 & 05 are properly installed and set in the right position. 04 05 01 E8 02 04 04 03 04 Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly.
12 1 Body E6 06 E6 B9 X2 C7 E9 X2 C6 C7 E11 C6 E11 68
12 2 E9 A8 A7 E5 Turn 90 E9 E5 A1 A2 E5 69 E5
12 B1(or B2) 3 E14 (or B1) B2 E4 E10 E4 E14 (or B1) B2 B1 (or B2) 12 E10 Black 2 4 2 Head Red Neck Angle 1 HEAD BODY RED BLACK Black Red 70
Level 2 13 Surf-bot Assembly Prepare the below parts first before you assemble the “Surf-bot”.
13 2 RIGHT LEFT BACK B4 BACK Boat E9 E4 E9 E4 72
13 3 FRONT 01 C1 A7 C1 E5 E5 13 4 BACK 01 C1 C1 E5 A1 E5 LEFT RIGHT LEFT 73 RIGHT
13 5 BACK A8 A2 E4 2 E5 1 2 1 E4 1 A8 1 E10 X2 1 B2 (or B1) B1 (or B2) E4 1 E4 FRONT 74 2 A2 Turn 180 E4 X2 2 E5
13 6 E4 X2 (or B1) B2 B1 (or B2) FRONT E10 X2 FRONT 13 7 HEAD BODY RED BLACK Neck Angle Red 2 2 Black 1 Head 75 Black Red
Level 2 14 Row-bot Assembly Prepare the below parts first before you assemble the “Row-bot”.
RIGHT 14 LEFT 2 B4 A9 B4 A9 E6 14 3 E5 X2 A7 FRONT A2 E9 E9 Boat 77
14 A1 4 E5 X2 A8 14 5 E8 E4 C1 C1 14 E8 E4 6 A8 FRONT E4 01 78
14 7 A2 FRONT E4 01 RIGHT 14 8 LEFT RIGHT LEFT 02 02 79
14 9 Red Head HEAD Black 2 BODY 2 RED BLACK Neck Angle Red 1 Black It’s time to have some FUN ! 1.Take outside under direct sunlight. Best results are obtained when operated on a sunny day. 2.For indoor fun, use a 50 watt halogen light. The product will not run on a cloudy day, shaded locations, indirect sunlight, or under a Fluorescent light.
Works perfectly in sunlight! 14 Solar Robots Educational Robotically Technical Science & Fun