Instructions

Firmenanschrift aufbewahren -
Keep the address of the company -
Veuillez conserver l'adresse -
Adres bewaren -
Nicht geeignet für Kinder unter 3 Jahren! - Verschluckbare
Kleinteile! Not suitable for children under 3 years! -
Contains small parts! Ne convient pas pour les enfants de moins
de trois ans! - Contient de petites pièces pouvant être absorbées! Niet
geschikt voor kinderen beneden 3 jaar! - Kleine onderdelen Kunnen worden ingeslikt!
Tel.: [phone] - 94115-0 - Fax: [phone]
[e-mail] - www.sol-expert-group.de
SOL-EXPERT group, C.Repky - Mehlisstrasse 19 - D-88255 Baindt
SOL-EXPERT
group
group
No. 76336
MADE IN EUROPE
10+
Return the device
to a certified provider at
the end of its useful life!
Generally: Please return the circuit board to a certified provider at the end of its useful life. These will then ensure it is disposed of in
compliance with directives. This is good for the environment and an important part of actively protecting the environment.
ENVIRONMENTAL NOTES
The 'Blinking Heart' soldering kit
The 'Blinking Heart' soldering kit is excellent to practice soldering on a
circuit board. Over 30 parts are soldered onto the circuit board step by
step according to the instructions. Once the kit is assembled the heart
can be operated in steady or blinking mode.
In blinking mode you can then also adjust the blink speed via the
potentiometer. So you can send messages, e.g. slow blinking: I love you - rapid blinking: I really love you!
Decorate the included plywood front any way you'd like and install if desired. Dimensions: 70 x 70 mm, over 30 parts.
The 'Blinking Heart' electronics building kit is powered via power bank or via USB port. This eliminates costly batteries.
Qty. Part Value/Description
1 Circuit board 76320
20 LED 5 mm Colour red
2 Resistor (R5/R6) 3K9 Ohm
2 Resistor (R1/R4) 56 Ohm
1 Resistor (R7) 620 Ohm
2 Capacitor (C1/(C2) 47 uF/10V
2 Transistor (T1/T2) BC547B
1 Switch (SW1) SS12D01
1 Pot (R2) 100K ohm
1 USB connector installed
1 Front panel 1-pc.
Heart with blinking or steady lights
soldering kit, powered via power bank
or USB port
Parts list Check and sort out parts
BC547B
You will also need:
Soldering iron, solder, wire cutters, tweezers, power bank
or USB port
47 uF
Recommendation for children
and teenagers: Assembly and
soldering should be supervised
by an adult.
4 0 3 7 3 7 3 7 6 3 3 6 8
IMPORTANT SAFETY NOTES
Keep this manual for future reference! It contains important information.
This kit is intended for USB power only.
The soldering iron, solder and the parts being soldered become very hot. Be very careful!
Always use a mat when soldering! This prevents parts and the circuit board from slipping.
We recommend using a soldering iron holder to set the soldering iron down safely during use.
Never connect the kit to 230 V mains voltage!
Acute danger to life!
QR Codes
Cliquez ici pour les instructions:
Klik hier voor de instructies:
https://www.sol-
expert-group.de/All-
about-soldering/Smart-kits-for-
soldering/Solder-kit-heart-with-flashing-
function-and-permanent-
light::1263.html?language=en
https://www.sol-
expert-
group.de/Rond-solderen/Clever-kits-voor-het-
solderen/Soldeerkit-hart-met-knipperende-functie-
en-permanent-licht::1263.html?language=nl
Click here for the instructions:
Hier geht es zur Anleitung:
https://www.sol
-expert-
group.de/Rund-ums-Loeten/Pfiffige-
Loetbausaetze/Loetbausatz-Herz-mit-
Blinkfunktion-und-
Dauerleuchten::1263.html?language=de
https://www.sol-
expert-
group.de/Autour-de-la-soudure/Kits-
astucieux-pour-la-soudure/Coeur-de-kit-de-
soudure-avec-fonction-clignotante-et-
lumiere-permanente::1263.html?language=fr
Conrad No.
1818582