Operating Instructions

17
EN
8. Maintenance, storage and transportation
8.1 Cleaning
Wipe o the dirt with a soft damp cloth.
Do not use aggressive cleaning agents or solvents.
Do not immerse the device in water!
Clean and dry wet equipment, accessories and transport containers prior to packaging them.
Only pack equipment again when it is completely dry.
Keep plug connections clean and protected from moisture.
8.2 Storage
8.2.1 General
The equipment may only be stored within the specified temperature limits (see Chapter 3 / Technical data) .
After prolonged storage, check the accuracy of the measuring device before using it.
8.2.2 Batteries / rechargeable batteries
To store the rechargeable battery remove it from the device or the charging station.
They should preferably be stored in a dry environment at room temperature (see Chapter 3 / Technical data) .
Protect from moisture and humidity. Dry wet or damp batteries before storage before usage.
Before storing for extended periods, charge the battery to 80% capacity (see Chapter 7 / Operation) . Repeat
the process every six months during storage.
After storage, fully charge the battery.
Check battery for any damage before use. Do not use damaged equipment.
8.3 Transport
8.3.1 General
The device may be damaged if it falls or is subjected to strong vibrations.
Never transport the product loose. Always use the original packaging or an equivalent
transport container.
Switch o the measuring device before transporting it.
Check the unit for damage before use.
8.3.2 Batteries/rechargeable batteries
The operator is responsible for adhering to the regulations and requirements valid on a national and inter-
national level when transporting or sending batteries and rechargeable batteries.
Before shipping, remove the batteries from the device.