USER'S GUIDE Outback-Mate600 LI Solar Powered Generator Before using this uni， t please read ALL instructions and information in this user manual.
CONTENTS ABOUT THE PORTABLE POWER SUPPLY SYSTEM..................... 2 SYMBOLS AND TERMS ...................................................................... 3 SAFETY INSTRUCTIONS ................................................................. 4 GETTING STARTED .......................................................................... 5 UNIT OVERVIEW ............................................................................... 6 INTERFACE ..............................................................
PLEASE read this entire manual before attempting to use this product. ABOUT THE OUTBACK-MATE600 LI . This quiet, portable Solaaron device is all about practicality and endurance, lasting for 3,000+ life cycles. WARNING Safety: 1. Avoid dangerous conditions. Do not charge this item in rain, snow or other damp environments.
SYMBOLS AND TERMS SAFETY INSTRUCTIONS Important Symbols The following symbols are used in this guide: WARNING WARNING This section provides important safety and operating instructions. Any improper use of the system can result in serious injury and possibly death in extreme situations. Warnings are conditions and practices that could result in personal injury. CAUTION CAUTION Cautions are conditions and practices that could result in damage to the unit or other equipment.
GETTING STARTED UNIT OVERVIEW Thank you for your purchase of the Solaaron OBM600 LI Portable Power Supply System. The 600-watt pure sine wave AC inverter output in this unit makes it compatible for use with many of today’s high-tech electronic devices. It also allows appliance motors to operate more efficiently and at cooler temperatures. You should have received the following items with your power supply system: Be sure to carefully read this user manual.
Interface description DC Charging 1 1. No external battery 30℃ INT AC 220V/50HZ AC output voltage PW 0W AC output power DC 13.2V WARNING Internal battery capacity Check adapter and cord for damage prior to use. Never use a damaged or frayed cord; electrical shock can occur if cord is damaged or frayed. If damaged, replace with a new one before proceeding with AC usage (request replacements via Contact Information on page 2). Improper charging may result in serious injury and or death. 2.
DC Charging 2 WARNING Never use a damaged or frayed AC cord; electrical shock can occur if AC cord is damaged or frayed. If AC cord is damaged, replace with a new cord before proceeding with AC usage (request replacements via Contact Information onpage 2). • To use your AC outlets, plug in the devices you want to run. Then turn on the inverter by switching the main AC power switch (see photo) to the ON position. Once on, the outlets will work like normal AC wall outlets in your home.
into the Anderson Powerpole outlets on the back of the system (plug black into black and red into red). Do not use an Anderson Powerpole extension cable for loads greater than 15 amps. For loads greater than 15 amps but less than the 20-amp max, plug the device directly into the Anderson Powerpole outlets. Connect with extension battery To use the DC cigarette outlet (see photo), simply plug in any 12-volt device that is rated for a maximum of 10 amps and operate as normal.
TECHNICAL SPECIFICATIONS Power Controls: Dimensions: 29.5 L*22.5 W*22 H (cm) Power button on front panel Weight: 7.2kg AC power ON/OFF switch on front of unit Operating Temperatures: 23°F–111°F (-5°C–45 °C) Input Ports: Operating Conditions: • Keep out of rainy, damp, or snowy conditions. AC: 110–240V, 50–60Hz • When charging outside with a solar panel, use the panel to shade the unit for better charging efficiency. •Do not store in a hot vehicle for extended periods of time (i.e.
MANUFACTURER WARRANTY INFORMATION 0 to 365 days from the date of delivery: What is covered? Any returned unit must be packaged safely and labeled clearly. Any damage caused by poor packaging when returning the unit is the responsibility of the customer and may void the warranty. At our discretion, units will be repaired or replaced. Defects in materials or workmanship. What is not covered? Damage or defect caused willfully or through negligence. Damage caused through excessive wear and tear.
Follow Us… Facebook.com/Solaaron Twitter.com/SolaaronEnergy Instagram.com/SolaaronEnergy SOLAARON LLC Tel: (800) 767-0134 E-mail: info@solaaron.com Address: 561 Hudson Street Ste.22 New York, New York 10014 Web: www.Solaaron.
