Specifications

12
• Unplug the CVG and fill the tank with the beaker that is supplied  , in the vertical position as
shown in figure 
•                  



If you do not change the resin of your CIS it will be affected by scale just like other ironing systems.
• The Compact Vapor Generator is fitted with a replaceable anticalc - system consisting of a resin filter,
which retains the limy substances in the water, preventing these from reaching the steam chamber in
the sole-plate and thereby extending the life of your CVG. If you so wish, on this model you may replace
the resin so that the CVG is kept in optimum condition. If you want to replace the resin, we recommend
you to do it every 6 months. Changing the resin does not mean that you may overlook the advice about
water hardness given in the section “BEFORE STARTING TO IRON” .
•   

• 
• Turn the part, situated in the heel of the appliance, in an anticlockwise direction as far as it will go, and the
arrow lines up with the open padlock (approx. 180º) and pull it back.
• To replace it, line up the arrow with the open padlock and turn it in a clockwise direction, fol-
lowing the directions in the drawing, pressing the part inwards at the same time, until reaching
the padlock closed position 
• 



• Unplug the iron and let it cool down.
• Use environment-friendly clay-based products to clean the sole-plate.

• To clean the outside of your CVG, use a cloth moistened in soapy water.
• Do not clean with abrasive chemical products or solvents as it may attack certain plastic parts and
/ or remove some of the marks and / or indications.
• Store your CVG in the vertical position, wind the cord round the heel and secure it with the clip.

.


• Before disposing of your used appliance, you should make it visibly unserviceable and have it disposed of
according to current national legislation.
• Ask your Distributor, Town Council or Local Authority for detailed information.

• Solac accepts no liability for faults in your appliance in the event of noncompliance with the specifications
of the warranty conditions or failure to follow the operating or maintenance directions included in the
instruction brochure for every appliance.
• The warranty conditions may be found in the accompanying “Word-Wide Guarantee” booklet.
• 
CVG9601.indd 12 28/10/09 17:40:04