Specifications

USE 13
en
) We recommend that clothes are sorted according to the temperature required for
ironing, starting with the garments that require the lowest temperature (min).
, N.B.: Ironing delicate garments with a higher temperature than necessary will damage
the fabric and cause the burnt residue to stick to the sole plate.
, If you have any doubts about the temperature to use on a particular garment, test a part
of the garment that is not visible, starting first with the lowest temperatures.
USE
) This appliance has been designed exclusively for ironing clothes. Do not use it for other
use.
) Completely remove all elements used for transport and packaging.
n If the unit is hot, handle with caution and avoid touching the metal sole plate.
n Never leave the iron in the horizontal position when the soleplate is hot. It must rest on
its rear part.
n Be careful with steam, do not direct steam towards people, animals or delicate objects.
n Always iron on a stable, firm and smooth surface.
) For very delicate garments, place a cloth between the iron and the delicate garment, to
avoid marks on the soleplate.
1 Extend the cord completely and plug the socket into the power supply. The warming
light will (9) come on. Set the iron upright.
2 Select the desired working temperature according to the garment being ironed (see
"TEMPERATURE SELECTION (fig. 4)”).
3 Select iron with steam ; or without steam , as convenient (see “STEAM
SELECTION").
4 Take the iron and slide the sole plate over the fabric to be ironed.
5 When you finish using the iron, move the steam (8) to the closed position and the
temperature selector (7) in the min position.
6 Disconnect the connection cord from the power supply
7 Empty the water tank (see "EMPTYING THE WATER TANK”).
Wait until the iron is completely cool and store upright in a safe place.
BEFORE USING FOR THE FIRST TIME
) Before using for the first time, use the appliance to iron a cloth or old garment, to clean
the system.
1 Set the temperature selector (7) to the max position and wait a few minutes until the
iron reaches the appropriate temperature (heating light will switch off).
2 Move the steam selector (8) to its fully opened position .
The steam will start to come out through the soleplate holes.
3 Take the iron by the handle and slide the sole over an old cloth.
4 When the water in the tank finishes, the steam will stop. The iron is then ready for use.
) Do not worry if the iron gives off a little smoke when using for the first time. This will
quickly disappear.
SYNTHETIC FIBRES, minimum temperature (min/•)
SILK, WOOL, medium temperature (••)
COTTON, high temperature (•••)
LINEN, MAX. temperature