Instructions / Assembly

Page 1 of 3

SolarGoesGreen SGG-S12-WW

READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

DESCRIPTION

The SGG-S12-WW is designed as a stand-alone spotlight which automatically illuminates at dusk. It is completely solar powered

and must be installed in position where the solar panel will receive the maximum sun per day. It’s energy-saving, auto switches

on/off and has an appealing design.

The unit has a single spotlight with 12 Warm White LED’s, and a Li-ion rechargeable battery which is easily replaceable. The

SGG-S12 can easily be installed and used in a broad range of applications such as; gardens, yards, walls, signs, flags etc.

PARTS

Battery Box and integrated solar panel

LED lamp fitting

Spike for lamp fittings

Battery Box Spike

Optional Flat Mount Kit

Optional Pole Mount Kit

Optional 9’ wire kit

*Please contact your retailer to purchase optional mount and wire kits.

**** BEFORE INSTALLATION, OPEN BATTERY COMPARTMENT ACCESS PANEL LOCATED ON BACK OF SOLAR PANEL BY

REMOVING 4 SCREWS. REMOVE RED INSULATOR TAB LOCATED BETWEEN THE END OF THE BATTERY AND THE POSITIVE

TERMINAL. REPLACE ACCESS DOOR AND SECURRE WITH 4 SCREWS.

INSTALLATION

I Solar Spot Light

INSTALLATION OF THE SOLAR PANEL

 Choose a place to locate the unit where there is abundant and unobstructed sunshine during the day. Any cover or

shade on the solar panel will affect its performance to charge the battery resulting in a shorter run time of the light

during the night (Fig.1). IDEAL LOCATION OF THE SOLAR PANEL WILL BE FACING SOUTH AT A 45 DEGREE ANGLE TO

THE HORIZON.

 The solar panel is adjustable. Adjust the angle of solar panel to 45 degrees for best results. The selected location should

not be near a night time light source like a porch or street light. If the panel receives light on it at any time it will not

allow the automatic day/night sensor to turn the light on.

Fig.1

PAGE 1
SolarGoesGreen SGG-S12-WW READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT. SAVE THIS MANUAL FOR FUTURE REFERENCE. DESCRIPTION The SGG-S12-WW is designed as a stand-alone spotlight which automatically illuminates at dusk. It is completely solar powered and must be installed in position where the solar panel will receive the maximum sun per day. It’s energy-saving, auto switches on/off and has an appealing design.
PAGE 2
INSTALLATION OF LIGHT  Spike it into soft ground. Adjust lamp aiming direction before installation(Fig.2)  After installation, connect Spot light wire with Solar panel wire (optional wire kit for longer use) and switch the unit to the ON position located on the back of solar panel. The light will automatically be operational when the panel detects that it’s dark enough. II Solar Flat Mount Light (OPTIONAL USE) INSTALLATION OF THE SOLAR PANEL  Drill 4 holes (dia.
PAGE 3
   Mount Solar Panel to pole mount base using provided butterfly nut (Fig.10).Adjust lamp initial aiming direction before fixing it. Fix the pole light unit to flag pole by using stainless steel clamps. There are different sizes of clamps suitable for different size of flag pole. (Fig.11) After installation, connect Spot light wire with Solar panel wire and switch the unit on the solar panel. The light will automatically be operational when the panel detects that it’s dark enough. Fig.10 Fig.9 Fig.