Instructions / Assembly

Page 1 of 3

SolarGoesGreen SGG-S24-WW

READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

DESCRIPTION

The SGG-S24-WW is designed as a stand-alone spotlight which automatically illuminates at dusk. It is completely solar powered

and must be installed in position where the solar panel will receive the maximum sun per day. It’s energy-saving, auto switches

on/off, and has an appealing design.

The unit has twin spotlights with 12 super bright LEDs and two Li-ion rechargeable batteries which are easily replaced. The

SGG-S24-WW can easily be installed and used in a broad range of applications such as gardens, yards, walls, signs, flags etc.

PARTS

Solar panel with integrated battery box

2 each- 12 Super Bright LED lamps

2 each - Spike for lamp

Solar Panel spike

*Optional Flat Mount Kits

*Optional Pole Mount Kits

*Optional 9’ wire kit

*Please contact your retailer to purchase optional mount and wire kits.

INSTALLATION

I. Solar Spot Light

INSTALLATION OF THE SOLAR PANEL

 Choose a place to locate the unit where there is abundant and unobstructed sunshine during the day. Any cover or

shade on the solar panel will affect its performance to charge the batteries resulting in a shorter run time of the lights

during the night (Fig.1). IDEAL LOCATION OF THE SOLAR PANEL WILL BE FACING SOUTH AT A 45 DEGREE ANGLE TO THE

HORIZON.

 The solar panel is adjustable. Adjust the angle of solar panel to 45 degrees for best results. The selected location should

not be near a night time light source like a porch or street light. If the panel receives prolonged ambient light on it at

any time during it will not allow the automatic day/night sensor to turn the lights on.

Fig.1

Fig.2

PAGE 1
SolarGoesGreen SGG-S24-WW READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT. SAVE THIS MANUAL FOR FUTURE REFERENCE. DESCRIPTION The SGG-S24-WW is designed as a stand-alone spotlight which automatically illuminates at dusk. It is completely solar powered and must be installed in position where the solar panel will receive the maximum sun per day. It’s energy-saving, auto switches on/off, and has an appealing design.
PAGE 2
INSTALLATION OF LIGHT   Spike spot lights into soft ground. Adjust lamp aiming direction before installation (Fig.2) After installation, connect spot light wire with solar panel wire (optional wire kits available for longer use) and switch the unit to the ON (--) position located on the back of the solar panel. The light will automatically be operational when the panel detects that it is dark enough. II. Solar Flat Mount Light (OPTIONAL USE) INSTALLATION OF THE SOLAR PANEL     Drill 4 holes (dia.
PAGE 3
   Mount Solar Panel to pole mount base using provided butterfly nut (Fig.10). Adjust lamp initial aiming direction before fixing it. Attach the pole light unit to flag pole by using stainless steel clamps. There are different sizes of clamps suitable for different size of flag pole. (Fig.11) After installation, connect spot light wire with solar panel wire and switch the unit on the solar panel. The light will automatically be operational when the panel detects that it’s dark enough. Fig.10 Fig.9 Fig.