Owner’s Manual Model Nos. 2001/3001 Commercial Jump Starter/Chargers Clore Automotive • Kansas City, MO 64161 • www.solaronline.com • 913.310.
the risk of accident. Working around lead-acid batteries may be dangerous. Lead-acid batteries release explosive gases during normal operation, charging and jump starting. Carefully read and follow these instructions for safe use. Always follow the specific instructions in this manual and on the SOLAR Jump Starter/Charger each time you jump start using the SOLAR Jump Starter/Charger.
SAFETY INSTRUCTIONS 1. Use of an attachment not recommended or sold by manufacturer may result in a risk of fire, electric shock, or injury to persons. 2. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting unit. WARNING 3. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.Read these instructions completely before using the SOLAR Jump Starter/Charger and save them for future 4.
SELECTING AND INSTALLING THE BATTERY BATTERY SELECTION 1. Battery Size (Group) to Use: Model No. 2001 – Group 31 1000 CCA and up, Standard Flooded or AGM. Model No. 3001 – Group 31 1000 CCA and up, Standard Flooded or AGM. 2. A high quality battery will last longer and perform better than a marginal quality battery. 3. Use a battery with a sealed top or with screw type flush fill caps. This will help prevent acid leakage should unit be inadvertently laid flat or turned over. 4.
OPERATING INSTRUCTIONS OPERATING THE UNIT AS A JUMP STARTER Warning: DO NOT JUMP START WHILE THE UNIT IS PLUGGED INTO 110 AC POWER SOURCE! NEVER JUMP START A FROZEN BATTERY! A SPARK NEAR BATTERY MAY CAUSE BATTERY EXPLOSION – FOLLOW INSTRUCTIONS BELOW TO REDUCE RISK OF A SPARK NEAR BATTERY. 1. Position DC jumper cables to reduce risk of damage by hood, door, or moving engine part. 2. Stay clear of fan belts, pulleys, and other parts that can cause injury to persons. 3. Check polarity of battery posts.
OPERATING THE UNIT AS AN AIR COMPRESSOR (Model No. 3001 Only) Warning: DO NOT INFLATE TIRES OR FLIP AIR COMPRESSOR “ON/OFF” SWITCH WHILE THE UNIT IS PLUGGED INTO 110 AC POWER SOURCE! 1. Snap air chuck on tire valve stem (some wheel covers may require use of valve stem extension). 2. Flip “ON/OFF” air switch on front panel to “ON” position. 3. Tire will inflate to preset pressure and compressor will shut off. 4. Disconnect air chuck from tire valve stem (compressor will come on again). 5.
TROUBLESHOOTING PROBLEM: Unit does not jump start.
LIMITED WARRANTY Clore Automotive, LLC warrants your SOLAR Commercial Jump Starter/Charger to be free from defects in material and workmanship for a period of one year from the date of sale to the original user or consumer purchaser. If your SOLAR Commercial Jump Starter/ Charger malfunctions or fails within the first 30 days of the warranty period because of a defect in material or workmanship, we will replace it.
WARRANTY AND TECHNICAL SUPPORT REGISTRATION Please complete the attached registration card to be eligible to receive FREE technical support, product updates and warranty service. TECHNICAL SUPPORT Technical support is available to registered users only. Call (800) 328-2921 Monday through Friday, 8:00 AM to 4:30 PM CST. THREE EASY WAYS TO REGISTER 1. 2. 3. Mail in the completed registration card below OR Fax the completed registration card to (800) 716-6531 OR Register your product online at www.
NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO.
