MSDS

DLG POWER BATTERY (SHANGHAI) CO., LTD.
Add.
No. 3492 Jinqian Road, Qingcun Town, Fengxian
District, Shanghai, China
P.C
201406
TEL
021-57474368
FAX
021-57474370
3
tract, mucus, membrane irritation and edema.
Special protective equipment
Use self-contained breathing apparatus to avoid breathing irritant fumes.
Wear protective clothing and equipment to prevent boby contact with
electrolyte solution.
6. Accidental Release Measures
Personal Precautions, protective
equipment, and emergency
procedures
Restrict access to area until completion of clean-up. Do not touch the
spilled material. Wear adequate personal protective equipment as
indicated in Section 8.
Environmental Precautions
Prevent material from contaminating soil and from entering sewers or
waterways.
Methods and materials for
Containment
Stop the leak if safe to do so. Contain the spilled liquid with dry sand or
earth. Clean up spills
immediately.
Methods and materials for cleaning
up
Absorb spilled material with an inert absorbent (dry sand or earth). Scoop
contaminated absorbent into an acceptable waste container. Collect all
contaminated absorbent and dispose of according to directions in Section
13. Scrub the area with detergent and water; collect all contaminated wash
water for proper disposal.
7. Handling and Storage
The batteries should not be opened destroyed nor incinerated since they may leak or rupture and release in the
environment the ingredients they contain.
Handling
Do not crush, pierce, short (+) and (-) battery terminals with conductive (i.e. metal) goods. Do not
directly heat or solder. Do not throw into fire. Do not mix batteries of different types and nds.
Do not mix new and used batteries. Keep batteries in non-conductive (i.e. plastic) trays.
Storage
Store in a cool (preferably below 30°C) and ventilated area away from moisture, sources of heat,
open flames, food and drink. Keep adequate clearance between walls and batteries. Temperature
above 90°C may result in battery leakage and rupture. Since short circuit can cause burn, leakage
and rupture hazard, keep batteries in original packaging until use and do not jumble them.
Other
manufacturer recommendations regarding maximum recommended currents and operating
temperature range.
Applying pressure on deforming the battery may lead to disassembly followed by eye, skin and
throat irritation.
8. Exposure Controls/Personal Protection
Respiratory protection:
Not necessary under normal use.
In case of battery rupture, use self-contained full-face respiratory
equipment. equipment with type ABEK filter.
Hand protection:
Not necessary under normal use.
Use rubber gloves if handling a leaking or ruptured battery.
Eye protection:
Not necessary under normal use. Wear safety goggles or glasses with
side shields if handling a leaking or ruptured battery.
Skin protection:
Not necessary under normal use. Use rubber apron and protective
working in case of handling of a ruptured battery.
9. Physical And Chemical Properties
9.1 Appearance (Physical shape and color as supplied:)
LiCoO
2
is a gray odorless power; Graphite is a black or odorless power; Organic solvent is a colorless
liquid; Lithium salt is a white, crystalline and odorless power.
9.2 Specific gravity (H2O=1)
LiCoO
2
: 3.80 Graphite: 2.0-2.2