Manual

Remove the submarine ring (12) and 2
side-window portals (15) and remove any
stuck cutouts. Insert the sub windows into the
square holes on the sub rings.
3.0
Remove the main submarine ring (13)
and remove cutouts. Arrange the ring so it
slides over the portals and rests in between in
the middle.
3.1
Remove the submarine ring (14) and
remove cutouts. Mount it to the square pegs
at the end of the side portals so it sits tight
and snug.
3.2
To prepare the first rib for installation,
locate the top submarine rib (16) and motor
fin (17) and remove any cutouts. Slide the
motor fin onto the rib as shown.
3.3
3. Assembling the Submarine
Step
ASSEMBLY STEPS
6
The little “rivets” on the portal windows should face
outwards when properly assembled.
Mounting
Tab Side