Manual

Parts List

1 x Printed Circuit Board (PCB)

1 x ATmega328 with Arduino optiboot bootloader

1 x LED (Pin 13 indicator)

1 x 470 ohm resistors (Yellow / Purple / Brown)

1 x SWT10 Switch (reset)

2 x 0.1µF Ceramic Capacitors (power & auto-reset)

1 x 10k resistor (Brown / Black / Orange) (auto-reset)

1 x 16MHz resonator

1 x 6-Pin male header (Programming / USB Pwr)

2 x 14-Pin male headers (ATmega328 connectors)
2 x 14-pin strips
Pin13
LED
We strongly suggest you count the parts in your kit to make sure you
have all the parts listed (c’mon - there’s barely a handful of parts, so
count them!). If anything is missing, contact Solarbotics Ltd. for
replacement parts information.
2 x 0.1µF
Capacitors
A
Tmega328
with Arduino Bootloader
6-pin strip
(programming)
16MHz
Resonator
SWT10
Reset Switch
10k
R
esistor
470 ohm
Resistor
6-pin strip
(pr
ogramming)
www.solarbotics.com
3
Ardweeny Manual v1.3