Installation Guide

EV Charger Activation and Configuration
After installing the EV Charging Single Phase Inverter, and the EV Charger Cable, the EV Charger should be activated in order to enable charging. This chapter
describes how to activate and configure the EV Charger using the SolarEdge monitoring platform mobile application.
NOTE
Connection to the SolarEdge monitoring platform is required for first EV charging.
1.
Download the SolarEdge monitoring app for
iOS or Android and tap the icon to access the SolarEdge monitoring platform.
2. Log in using your monitoring platform credentials.
3.
Tap the car icon to access the EV Charger screens.
Figure 4: Monitoring platform mobile application
4.
Tap Activate EV Charger and follow the instructions on the screen (scan the EV Charger code sticker using the device camera, or enter it manually).
Figure 5: EV Charger activation
EV Charger Activation and Configuration
EV Charger Cable Installation and EV Charger Configuration MAN-01-00445-1.1
3