P300-P500 P-Series Power Optimizer Frame-Mounted Module Add-On

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc.
Allothertrademarksmentionedhereinaretrademarksoftheirrespectiveowners.Date:08/2019/V01/ENGROW.Subjecttochangewithoutnotice.
Power Optimizer
Frame-Mounted
P300 / P370 / P404 / P500
(1)
Rated power of the module at STC will not exceed the optimizer “Rated Input DC Power”. Modules with up to +5% Power tolerance are allowed.
(2)
For other connector types please contact SolarEdge.
(3)
For ambient temperature above +85°C / +185°F power de-rating is applied. Refer to Power Optimizers Temperature De-Rating Technical Note for more details.
(4)
It is not allowed to mix P404 with P300/P370/P500 in one string
(5)
TheP300/P370/P500cannotbeusedwiththeSE3Kthreephaseinverter(availableinsomecountries;refertoThreePhaseInverter
SE3K-SE10Kdatasheet).
(6)
ForSE27.6K,SE55K,SE82.8K:Itisallowedtoinstallupto13,500Wperstringwhen3stringsareconnectedtotheinverterandwhenthe
maximumpowerdifferencebetweenthestringsisupto2,000W;invertermaxDCpower:37,250W
Supported
frame
crosssection
1.1-2.2mm /
0.04-0.09in
> 12mm / 0.48in
OPTIMIZER MODEL
(TYPICAL MODULE COMPATIBILTY)
P300
(FOR 60-CELL
MODULES)
P370
(FOR HIGH-POWER
60-CELL AND FOR
72-CELL MODULES)
P404
(FOR 60-CELL AND
72-CELL, SHORT
STRINGS)
P500
(FOR 96-CELL
MODULES)
INPUT
Rated Input DC Power
(1)
300 370 405 500 W
AbsoluteMaximumInputVoltage
(Vocatlowesttemperature)
48 60 80 Vdc
MPPT Operating Range 8 - 48 8-60 12.5 - 80 8 - 80 Vdc
MaximumShortCircuitCurrent(Isc) 11 10.1 Adc
MaximumEfciency 99.5 %
WeightedEfciency 98.8 %
Overvoltage Category II
OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER)
Maximum Output Current 15 Adc
MaximumOutputVoltage 60 85 60 Vdc
OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF)
SafetyOutputVoltageperPowerOptimizer 1 ± 0.1 Vdc
STANDARD COMPLIANCE
EMC FCCPart15ClassB,IEC61000-6-2,IEC61000-6-3
Safety IEC62109-1(classIIsafety),UL1741
RoHS Yes
Fire Safety VDE-AR-E2100-712:2013-05
INSTALLATION SPECIFICATIONS
MaximumAllowedSystemVoltage 1000 Vdc
Dimensions(WxLxH) 139x165x40/5.5x6.5x1.6 139x165x48/5.5x6.5x1.9 mm / in
Weight(includingcables) 750/1.65 775 / 1.7 895/2.0 870/1.9 gr / lb
Input Connector MC4
(2)
InputWireLength 0.16/0.52 m / ft
Output Connector MC4
OutputWireLength 0.9/2.95 1.2/3.9 m / ft
Operating Temperature Range
(3)
-40 - +85 / -40 - +185 ˚C/˚F
Protection Rating IP68/NEMA6P
Relative Humidity 0 - 100 %
PV SYSTEM DESIGN USING
A SOLAREDGE INVERTER
(4)
SINGLE PHASE
HD-WAVE
SINGLE
PHASE
THREE
PHASE
THREE PHASE
FOR 277/480V
GRID
Minimum String Length
(PowerOptimizers)
P300/
P370/
P500
(5)
8 16 18
P404 6 14(13withSE3K) 14
MaximumStringLength(Power
Optimizers)
25 50 50
Maximum Power per String 5700 5250 11250
(6)
12750 W
Parallel Strings of Different Lengths
or Orientations
Yes