Installation Guide Manual

donc impératif de n'ouvrir le couvercle qu'après avoir arrêté l'onduleur à
l'aide de l'interrupteur ON/OFF. Ceci coupe la tension DC à l'intérieur de
l'onduleur. Attendez cinq minutes avant d'ouvrir le couvercle. Sinon, il y
a risque d'électrocution du à l'énergie stockée dans les condensateurs.
LCD panel: displays inverter information and configuration parameters
LCD LEDs: Three LEDs indicate the following inverter statuses:
Color Description Functionality
Green Power production
On - The inverter is producing power.
Blinking - Standby mode. The inverter is in
Standby mode until its working voltage is
reached. The inverter then enters Production
mode and produces power.
Off - The inverter is not producing power. This
may be during Night mode, when the inverter
ON/OFF switch is OFF or when an error occurs.
Yellow
Module
communication and
inverter shutdown
Blinking:
Monitoring information is being received
from a power optimizer.
The inverter is being shut down.
Red Fault
On - There is an error. Refer to Errors and
Troubleshooting on page 96 for more
information.
Blinking - The inverter is being shut down.
All LEDs turn on while the inverter is being configured.

Chapter 3: Installing the Inverter 33
Three Phase System Installation Guide MAN-01-00002-4.3