Installation Manual

Display
SelectDisplay tosetthefollowing:
T e m p e r a t u r e < C >
L C D O n T i m e < 3 0 >
l Temperature:SelectCelsiusorFahrenheitunits.
l LCD On Time <30>:ThenumberofsecondsthattheLCDbacklightisONafterpressingtheLCDlight
button.Setavaluewithintherangeof10-120seconds.
Maintenance
SelectMaintenance tosetthefollowingoptions:
D a t e a n d T i m e
R e s e t C o u n t e r s
F a c t o r y R e s e t
F W U p g r a d e
A F C I < D i s >
D i a g n o s t i c s
S t a n d b y M o d e
G r i d P r o t e c t i o n
B o a r d R e p l a c e m e n t
l Date and Time:Settheinternalreal-timeclock.IfconnectedtotheSolarEdgemonitoringplatform,
thedateandtimearesetautomaticallyandonlytimezoneshouldbeset.
l Reset Counters:ResetstheaccumulatedenergycountersthataresenttotheSolarEdgemonitoring
platform
l Factory Reset:Performsageneralresettothedefaultdevicesettings.
l FW Upgrade:PerformasoftwareupgradebyusinganSDcard.Refertoupgrading_
an_inverter_using_micro_sd_card.pdf.
l Diagnostics:DisplaystheIsolationStatusandoptimizersstatusscreens.Referto
http://www.solaredge.us/files/pdfs/application_note_isolation_fault_
troubleshooting.pdf.
l AFCI:Enablesordisablesarc-faultself-test.Referto
http://www.solaredge.com/sites/default/files/arc_fault_detection_application_
note_na.pdf.
l Standby Mode:Enables/disablesStandbyMode-forremotecommissioning.
l Grid Protection:Availableinspecificcountries.Enablesviewingandsettinggridprotectionvalues.
l Optimizer Conf.:OpenstheRapidShutdownmenu,toenable/disablePVRSS.

Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
44
Display